參考文獻
【1】J. G. Maveety and J. F. Hendricks, “A heat sink performance study considering material, geometry, nozzle placement, and reynolds number with air impingement”, ASME J. Electronic Packaging,Vol.121, pp. 156-161 (1999).
【2】Intel Corporation, Intel ? Pentium ? 4 Processor Extreme Edition on 0.13 Micron Process in the 775-land Package, November 2004.
【3】G. Ledezma, A. M. Morega and A. Bejan, “Optimal spacing between pin fins with impinging flow”, ASME J. Heat Transfer, Vol.118, pp.570-577(1996).
【4】J. G. Maveety and H. H. Jung, “Design of an optimal pin-fin heat sink with air impingement cooling”, Int. Comm. Heat Mass Transfer, Vol.27, No.2, pp.229-240(2000).
【5】V. A. Chiriac and A. Ortega, ”A numerical study of the unsteady flow and heat transfer in a transitional confined slot jet impingingon an isothermal surface”, Int. J. Heat Mass Transfer 45,1237-1248(2002).
【6】R. S. Amano, “Electronic cooling technology with use of turbulent impinging jets”, IEEE 0-7803-5912-7 Inter Society Conference on 80 Thermal Phenomena, 339-346(2000).
【7】S. V. Garimella and B. Nenaydykh, “Nozzle-geometry effects in liquid jet impingement heat transfer”, Int. J. Heat Mass Transfer, Vol.39, No.14, 2915-2923(1996).
【8】Malin, ”Modelling the effects of lateral divergence on radially spreading turbulent jets”, Computers and Fluid, Vol.17, No.3,453-465(1989).
【9】D. B. Spalding,” The prediction of two-dimensional steady turbulent elliptic flows”, Int. Sem. Heat and Mass Transfer in Flows with Separated Regions, Herceg Novi Yugoslavia(1969).
【10】V. E. Srinath and K. David, “Jet impingement heat transfer on dimpled target surfaces”, Int. J. of Heat and Fluid Flow 23,22-28(2002).
【11】J. Y. San, C. H. Huang and M. H. Hsu, “Impingement cooling of confined circular air jet”, Int. J. Heat Mass Transfer, Vol.40, No.6,1355-1364(1997).
【12】B.E. Launder and D.B. Spalding, “The numerical computation of turbulent folws”, Computer Methods in Applied Mechanics and Engineering 3, 269-289(1974).
81
【13】D. B. Spalding, “Recent Advances in Numerical Methods in Fluids”, Ed. C. Taylor and K. Morgan, pp.139-167, (1980).
【14 】C. T. Crow, M. P. Sharma and D. E. Stock, “The
Particle-Sources-In Cell (PSI-Cell) Model for Gas-Droplet Flows”,Journal of Fluids Engineering, pp. 325-332, June, (1977).82

熱設計論文下載：柱形散熱片幾何尺寸影響熱傳性能研究TW.pdf

標簽： 點擊： 評論: